Specification of Stainless Steel Coil 316: Type 316 compared to 304, it has addition of molybdenum and slightly higher nickel content. The resultant composition of 316 gives the steel much increased corrosion resistance in many aggressive environments. The molybdenum makes the steel more resistant to pitting and crevice corrosion in chloride-contaminated media, sea water and acetic acid vapours. The lower rate of general corrosion in mildly corrosive environments gives the steel good atmospheric corrosion resistance in polluted marine atmospheres.
Standard: ASTM A240/A480
Equivalent: DIN 1.4401. SUS 316
Finish: No.1, 2D, 2B, No.4, No.5, HL, BA, Scotch Bright, Mirror
Edge: Slit or Mill
Protection: Paper or PVC
Customized Shape: Disc and up request
Application of Stainless Steel Coil 316: bolt and but, weaving wire, chemical use, food sector, mining, architecture, pharmaceutical and petroleum industries.
Finish |
Thickness (mm) |
Width (mm) |
|
HR |
No.1 |
2.0 ~ 30.0 |
750 ~ 1524 |
30.0 ~ above |
Upon Request |
||
CR |
2D |
0.4 ~ 3.0 |
750 ~ 2000 |
http://www.maytunstainless.com/